That does not mean it is a good idea to run nothing but melee dps for the entire raid, but more so that having more melee than usual on your roster is not a hindrance if they play well. All being lower tier means is that, all else being equal, those specs will be less desirable for the raid based on current tuning. World of Warcraft Slang Translator. Enter WoW Slang: More Tools: Send Free Text Messages Text Slang Dictionary: WoW Term Lookup: WoWSlang is part of. Healers don’t provide a make it or break it amount of dps, or even a “make encounters noticeably easier” amount of dps. They just aren’t designed to do that. Even the paladins. I’ve never heard or seen at any point in the history of the world (of warcraft) where the dps provided by healers was the reason a raid was successful. DPS means damage per second, and tanking isnt damage because the DPS role players will do more damage than you any day. Tanking is about 'threat' its about making the person u are fighting feel u deserve the most attention, most tanking classes like warriors/paladins/bear druids/ and deathknights (sometimes) have abilities based around building a high amount of aggro (or threat) and wear tank. Damage per Second. But, if you're a caster without any DoT's, then it's pretty much the average of all your hits. Which means an 8k dps rogue could be doing more overall damage than a 10k dps mage.

• What Does Dps Mean In Wow
• What Does Dps Mean In Wow Classic
• Wow Dps Meters 8.3
• What Does Dps Mean In Wow

Damage dealers, as the name implies, are players who are responsible for dealing damage in the group. The term is almost always abbreviated as DPS (Damage per second) or DPSer in-game. Each class can play as DPS with the right spec in the right gear.

The role of DPS is perhaps the most obvious of all; they focus on dealing damage to the party's targets. While the tank holds the attention of the enemy and healers keep everyone alive, it is up to the DPS to actually deal the damage which will result in victory for the party. Compared to players in other roles and specs, DPS can deal damage very quickly and sustainably.

However, good DPS must learn not only how to deal damage, but how to do so without drawing the fire of the target; dealing too much damage too quickly may lead the target to turn its wrath upon the DPS, leading to a stressed tank, a mana-drained healer, or simply a dead DPS. Most DPS specs have aggro control abilities which can help with this, but must still take care not to exceed the tank's capabilities for holding aggro. DPS often have additional responsibilities within the group, such as interrupting critical abilities and applying crowd control, and may also be called upon to assist with healing or off-tanking.

DPS tends to be the most numerous role in any group, with at least half of the group typically being DPS, and is usually also the least critically responsible. A tank who fails to taunt quickly enough, or a healer who fails to notice a target taking damage can quickly lead to the death of members of the group; the DPS usually have a greater degree of latitude in performing their role.

However, the DPS must still pay close attention to the fight; not only are they often responsible for critical interrupts and other situational elements, but should the DPS fail to deal sufficient damage in a period of time, the group will usually wipe, whether because of a boss's enrage timer or the healers simply running out of mana. It is therefore the responsibility of the DPS to deal damage quickly enough for the group to triumph.

• 3Group Function
• 4Improving Damage Output
  • 4.2Itemization

DPS specs

As mentioned above, all classes can be DPS. Among these, four classes are exclusively pure damage dealers no matter which specs they choose: hunter, mage, rogue, and warlock. Nevertheless, each of their specs has different damage dealing potential and function, so it is still important for players of those classes to choose the right specs.

Each of the remaining classes can be DPS with the right specs: shadow priest, balance/feral druid, elemental/enhancement shaman, fury/arms warrior, retribution paladin, windwalker monk, and frost/unholy death knight

Types of DPS

1. Caster: Most of their damage is spell damage: mage, warlock, shadow priest, balance druid, and elemental shaman.
2. Melee: Most of their damage is physical damage dealt within melee range: rogue, fury/arms warrior, retribution paladin, enhancement shaman, feral druid, windwalker monk and frost/unholy death knight.
3. Ranged: Most of their damage is physical damage dealt from a distance: hunter.

For the sake of simplicity, hunters and casters are often collectively called ranged DPS in contrast to melee DPS. It is not necessary for casters to stay at range during a fight, although it is usually advisable to do so.

Group Function

Primary function of DPS

The primary function of DPS is dealing damage to the mobs. Good damage dealers help the group to run smoothly by killing the mobs in a short time. Running instances with a group full of bad DPS means prolonged time will be needed for the fighting and completing the instances. The risk of the need to deal with respawn will also be higher. Besides, prolonged fighting increases the risk of the healers running out of mana, resulting in a wipe of the party.

Furthermore, almost all boss encounters in recent expansions have an enrage mechanic, either a 'hard' enrage where the boss will wipe the raid after a set period of time (e.g. Ultraxion), or a 'soft' enrage mechanic making the fight more and more difficult as it goes on (e.g. Spine of Deathwing). If the rate of damage output is too low in these situations, the party is going to wipe when the bosses enrage or the bosses/adds are too difficult to handle eventually.

Secondary Functions of DPS

Many DPS classes can also perform secondary functions in the group:

1. Crowd Control: Some of the DPS classes have good crowd control abilities, such as Sheep, [Freezing Trap], [Sap], [Fear], [Hibernate], etc.
2. Off tanking: Ideally, the tank should be tanking the mobs that need to be killed first and everything else are crowd controlled. However, sometimes the CC'ed mobs break free prematurely, or someone aggros adds. Those mobs should be CC'ed or picked up by the tank immediately but if that is not possible, DPS with high armor or avoidance should try to get aggro from them, so that they will not kill the healers in two hits.
3. Healing: Normally, healing is exclusively the job of the healers. However, if the healers are killed, or the healers cannot keep up with all the healing job due to exceptionally high damage or AOE damage from the mobs, the DPS classes that can heal should help healing in order to save the party from a wipe.
4. Dispelling: There are numerous mobs in the game that can cast debuff on the players. Some of them can be fatal if not removed immediately (e.g. Maiden of Virtue's Holy Fire). De-cursing becomes the top priority for the healers and DPS in such encounters, before healing and dealing damage respectively.
5. Buff/debuffing: Alongside those longer buffs such as [Power Word: Fortitude] or [Blessing of Kings] that should be casted before the fight, some DPS classes have beneficial buffs to the party during fight, such as shamans' various totems, beast mastery hunters' [Ferocious Inspiration], etc. Some classes can cast debuffs on mobs to weaken them or increase the damage they receive. Warlocks' various curses, warriors' [Thunder Clap] and [Demoralizing Shout], and retribution paladins' [Heart of the Crusader] are some examples.
6. Mana Regeneration: shadow priests are famous for their mana regeneration ability [Vampiric Touch] to mana users in the party. Having a shadow priest in the group means there will be less down time for drinking. Survival hunters' [Hunting Party] is another group mana regeneration talent added in WotLK. Paladins' [Judgement of Wisdom] and shamans' [Mana Spring Totem] also help the group's mana regeneration but to a much lower extent.
7. Pulling: Hunters' [Misdirection] is a great skill in raid. It gives a good initial preload of threat to the tanks. Furthermore, in some encounters, it allows the tanks to stay at their desired tanking position and the hunters can misdirect the mobs straight to them. This makes some difficult pulling, like that of the Majordomo Staghelm encounter, become much easier.

In conclusion, dealing damage is unquestionably the primary job of DPS in group, especially with the advent of recent expansions, where almost all bosses have hard or soft enrage mechanics and a DPS race component.

However, their secondary functions should not be forgotten. No matter how good their damage output is, a hunter who does not know how to trap or misdirect, or a mage who always forgets to re-sheep does not deserve a spot in a raid.

What Does Dps Mean In Wow

Improving Damage Output

Despite the fact that damage dealing is the primary job of a DPS class, people who join PUGs a lot, or join casual guild raids, know there are a lot of damage dealers with low damage output. Despite this, it is very easy (and common) for the DPS as well as their groupmates to be unaware of their poor performance. In a 5-man instance group there are (usually) three DPS. If the other two DPS are doing excellent job, the group can still clear the instance without any problem. (The same is true in 10-man or 25-man raids. The low damage output of an individual is not easy to notice, unless someone has damage measuring addons installed (e.g. Recount (Addon), etc.). Any DPS who care about their own performance, as well as the raid leaders who want to check the performance of everyone should have at least one of those addons installed.

Nevertheless, the interpretation of the result of those addons should be careful. Depending on the design of the addons, damage output can be underestimated significantly. For example, if the addon does not record pet damage of a beast mastery hunter, his reading can easily drop to the last of the DPS, despite the fact that he and his pet may have actually done the most damage. Moreover, some classes/specs are not meant to do as high damage as the others, yet they are still valuable to the group for their utility (e.g. [Replenishment], raid-wide damage enhancements, debuffs on mobs).

In order to monitor damage output it is important to install one of these addons to see how one is doing and what sort of improvements are workin. There are many things a DPS can do to increase damage output:

Talent

Hybrid classes need to focus their talent points on talents that helps their job as damage dealers. Even for the four pure DPS classes, some talents are good for PvP but useless in PvE. You can refer to the individual class guides for optimized talent builds. Inspecting the talent builds of more experienced players, or asking for the others' criticism of your build on the class forums are also useful.

Itemization

By itemization, it does not mean trying your best to get yourselves more epic gear. It means the way you gear up yourselves. For example, I have two chest pieces of the same quality and similar item level. Which one will give me more damage improvement? What should I enchant/gem it with to give the best outcome? Such questions are frequently ignored by new players, as they usually think they will be better once they have more epic gear. This is only partially true. It is possible that an epic gear does not have the best stats for damage, so a good blue gear concentrated on damage stats will be a better choice. It is even harder to decide when both of the items are epic from sources of similar level. In that case, knowing the damage stats priority of individual is important.

Casters

Main article: Spell hit

It is EXTREMELY common to see new or casual-player casters neglecting the most valuable damage stat: hit rating. For any casters joining raids, their spells have 17% chance to miss the bosses (i.e. level-based misses as bosses are always treated as 3 levels above the player, not elemental resists). 17% of extra hit from talents and gear is needed before reaching the 'hit cap'. Hit rating is normally the most valuable damage stat because each point of hit rating produces more increase in overall damage than each point of critical strike rating or spell power before the hit cap. (As a side note, DPS classes usually should max accessible talents that improve the hit chance of their primary type(s) of damage, unless they have very good gear that provides enough hit, or a talent budget is so tight that you need to sacrifice hit talents for other vital talents.)

For casters with zero extra hit chance from talents, 1742 hit rating is needed to reach the hit cap at level 85. Note that Draenei have [Heroic Presence] (racial trait) which will reduce the necessary spell hit cap to 1640. Certain talents such as [Twisted Faith] can also allow casters to convert spirit into hit.

After the hit cap is reached, generally haste rating, spell power, and critical strike rating are the stats to stack next. Intellect indirectly improves damage output by increasing spell critical rate. Which one of the above is more important depends on the class and spec in question. Please refer to the respective class guides for details. Spell penetration is normally not very useful in PvE.

Melee/Ranged

For DPS classes dealing mainly physical damage, weapon is the most important determinant of the damage output. First of all, you need to make sure you have the correct type of weapon! Rogues are always dual-wield. Those invested heavily in Assassination Tree want daggers, while combat rogues usually use swords or fist weapons according to which weapon they are specialized at. Arms warriors usually use 2-hand weapons they specialized at and fury warriors dual wield. (Note: mace specialization of both rogue and warrior is for PvP in general, so PvE players normally do not spec it.) Ranged weapons for rogues and warriors are mainly chosen for their stats, so any ranged weapon with good damage stats will do. Enhancement shamans typically dual-wield because it gives much better damage output than using 2-hand weapons. Retribution paladins will be fine with any 2-hand weapons. For hunters, any bows, crossbows or guns will do. Their melee weapons are chosen for their stats. Generally, the overall stats of a 2-hand weapon are better than the sum of two 1-hand weapons. Death knights can use 2-hand weapon or dual-wield for damage dealing depending on their specs. Lastly, humans, dwarves, orcs and trolls have some small benefit from their racial trait for specific types of weapon.

Having chosen the right type of weapon, the next step is to look at the details of the weapons. Damage per second (dps) of the weapon is usually the most important factor. However, some specs benefit more from faster weapons, while others need slower weapons. Besides, for dual-wielders, it is preferable to use the one with higher dps with the preferred speed on mainhand. If both weapons have similar dps and speed, the one with proc should be mainhand and the one with only +stats offhand.

Concerning other stats of weapon as well as other gear, expertise rating, hit rating, haste rating, critical strike rating and attack power (and ranged attack power for hunters) are all important. Some classes/specs also need strength and/or agility. Their priority of important is different for different classes/specs, some of those still remain controversial. Therefore, please refer to the specific classes guides or forums for details.

Attack/Spell Rotation

There are at least five to six damaging skills for each DPS classes/specs. If one only uses those skills randomly or in a suboptimal order, he is probably doing lower overall damage than his full potential. Every class/spec have their own optimal attack/spell rotation. For example, a fire mage spell rotation against bosses is typically: Scorch x 5 > Fireball x 7-8 > Scorch x 1 > repeat Fireball and Scorch. For a beast mastery hunter with attack speed of 2.0 or less, simply spamming Steady Shot and refleshing Serpent Sting occasionally is enough. On the other hand, marksmanship hunters need to add Chimera Shot in their rotation to produce the maximum dps.

Positioning

Positioning is very important for melee classes but unfortunately many new players do not know this. Melee DPS should attack from the back of the mobs whenever possible. It is because the mobs cannot parry or block attacks coming from their back. Besides, it also helps your tanks because if you attack from the front and the mobs parry, their next attack will be faster. During boss fights, if several melee DPS attack from the front, the combined increase in boss damage to the tanks can be significant! It should be noted that when fighting bosses with the ability tail sweep, typical those dragon bosses, people who stand directly behind the tail of the boss will be hit frequently by the ability. Fortunately, you are considered as 'attacking from back' as long as you are within the 180 degree half circle behind the bosses, so when fighting those tail sweeping bosses, melee DPS can safely attack the bosses standing at left or right side of the tail.

For caster/ranged DPS, usually staying out of melee range is advised. This not only helps to reduce the chance of being affected by the mobs' AOE abilities, but also potentially improves damage output. The reason is a player in melee range will pull aggro from tank when his threat is greater than 110% of the tank, while one outside melee range will need more than 130% of the tank's threat to pull the boss. See next subsection for how threat can affect damage output.

Handling Threat

The above few subsections only talk about the potential damage output possible in theory. In reality, this can be limited by another important factor: threat. All the damaging abilities generate threat. If the threat produced by a DPS is so high, the mob will turn to attack that DPS instead of the tank. Aggroing the mob from the tanks must be avoided as much as possible, as this frequently means death of that DPS. Even if the healers can spam healing to keep that DPS alive, they will need to spend a lot more mana doing so. Without any help to reduce threat generation, out-threating the tank will be common, which means the DPS will need to reduce their damage output or even hold back their attack in order to avoid this.

Fortunately, DPS classes have many passive talents as well as active abilities to reduce threat generation. Usually it is good to max the passive talents that reduce threat generation of your primary damaging abilities. For active abilities, some remove the players from mobs' aggro list temporarily (e.g. [Divine Shield], [Blessing of Protection]), some reduce the players' threat temporarily (e.g. [Fade]) and some reduce threat permanently (e.g. [Feign Death], [Vanish], [Invisibility], [Soulshatter], [Feint], [Cower]). Those temporary abilities should only be used when the DPS players have already aggroed.

On the other hand, classes with permanent threat reduction abilities can use them immediately when aggroed, but during boss fight, it is more preferable to use them before drawing aggro. In the old time, when to use them was mainly guess work. Now we have a few addons that give fairly accurate estimation of the threat generated by everyone: Omen or KLH Threat Meter. During boss fights, rogues, mages and warlocks should watch the threat meter closely and cast Vanish, Invisibility and Soulshatter respectively when their threat is high. With the best threat reduction talent in the game, hunters may want to use Feign Death earlier and whenever its cooldown ends, until it is certain that the threat will not catch up with that of the tanks for the rest of the fight. For the rest who do not have any of the above threat reduction abilities, temporarily lowering the damage output when the threat is high is the only choice.

Lastly, as mentioned in the last subsection, caster/ranged DPS should try to stay out of melee range whenever possible so that they will not pull aggro unless their threat is more than 130% of that of the tanks (compared with 110% if within melee range).

Mana

Mana management is important for mana-using DPS classes. Mana should not be a problem during trashing clearing if you ensure good amount of mana before every pull. However, during long boss fights, running out of mana (oom) can be a problem. The damage output of most of the mana-using DPS classes drops drastically when oom, so we should try to avoid this. Use abilities like [Evocation] or [Aspect of the Viper] when needed. Always bring some mana potions to boss fights. Having a reasonable amount of mp5 (or spirit for some classes) from the gear is important. How much is enough varies among classes and specs. You will probably need some trial and error before finding out the amount you need.

Staying Alive!

A dead DPS produces zero damage. To maximize your total damage output, the important of staying alive cannot be emphasized enough.

First of all, make sure you have reasonable health for the particular fight. This is especially important for fights that everyone is certain to receive some damage (e.g. Shade of Aran fight).

Second, walk out of danger ASAP. Many bosses have AOE abilities that do high damage (e.g. Keli'dan the Breaker) or cause instant death (e.g. Prince Malchezaar's Enfeeble and the AOE followed). Melee (and sometimes caster/ranged) DPS need to learn what emote/debuff to look for and run out immediately. There are also many fights that circles of damaging zone forms under the feet of random players regularly (e.g. Grand Warlock Nethekurse, Nightbane). Make sure you run out of it right away, even if this means canceling a spell you are casting.

Third, don't be cheap and drink a healing potion if your health goes too low. Sometimes your healers maybe busy enough at healing the tank, so use your bandage as well if you know you are not getting any healing soon. Hybrid DPS such as Enhancement/Elemental Shamans or Retribution Paladins should also heal themselves if possible, both for survivability as well as eliminating the risk that the healer draws aggro from casting a heal on you.

Group Synergy

What Does Dps Mean In Wow Classic

Although not much can be done for a 5-man instance group, synergy between different classes in raid can produce significant improvement in performance. For example, melee DPS love to have a enhancement shaman inside their group because of the [Windfury Totem]; Balance druids (moonkins) have an aura that gives 5% increase in spell critical chance to group members. Concerning the whole raid, if there are a lot of mana-using DPS, having a shadow priest help a lot with mana regeneration; if the group is melee heavy, warrior's [Sunder Armor] or rogue's [Expose Armor] debuff helps a lot.

Above is just a general overview of DPS classes. For details about specific classes/specs or specific fights, please refer to the respective articles or forums.

Other Tips

• Now it is so easy to collect a full epic set by grinding battlegrounds, it is not uncommon to see people raiding in PvP gear. Although PvP epics are usually better than their blue counterparts, they usually spent a lot of item points on stamina and resilience, so the damage stats may not be as good as the PvE epic counterparts. Furthermore, the PvP epics typically lack in mana regeneration stats, so mana users in full PvP gear may find themselves oom frequently, especially during prolonged boss fights.

• There are many fights that AOE damage is important, such as Shattered Halls gauntlet event, or Jan'alai. Mages and warlocks are the best AOE DPS. Several other classes also have AOE damage skills but the effectiveness is lower. Group/raid leaders should bear this in mind when picking DPS for a fight known to require heavy AOE. Hunters and Balance Druids also have pretty good AOE attacks.

• Although not strictly necessary for DPS, it is better for you to have read something about the fight before you attempt it. This gives you some idea of what to expect as well as tips to handle them.

See also

Whenever you group up with other people in WoW, in the vast majority of cases you will have people fulfilling one of three roles – tank, healer or dps.

Tanks are the guys that stand at the front and taunt all the bad guys to hit him. He’s the guy often wearing a tin can and his main job is to have everything attacking him.

Healers, conversely, stand at the back, trying desperately NOT to be noticed by the bad guys, whilst keeping everyone alive.

Tanks and healers, generally, fulfil exactly the same job on every encounter – they often have fewer spells or attacks to learn and once they know how and when to use them, they can pretty much do their job “on the fly”.

The final role to be filled in a group is the DPS – the damage dealers. In any group you have more of this role than any of the other two. They are the guys who actually need to know which target to attack first, which targets to incapacitate, which to run away from, which groups need single-target attacks and which groups can all be hit at once.

The onus is on the damage dealers to ensure they do not gain the attention of anything they are shooting – yet if they do, react quickly in either misdirecting back onto the tank, using any talents to remove that attention or using a talent to incapacitate (crowd control) the bad guy.

Damage dealers also have to be aware of everything around them, especially the location of the healer, to ensure they are always within range of heals and to be ready to help the healer or other team mates if it looks like they are in trouble.

When the party is attacking a larger (or hard hitting) group, the damage dealers are often called upon to “crowd control” (CC) – a method of temporarily taking individual bad guys out of a fight whilst everyone concentrates on killing the rest. Different classes of your party will have different types of crowd control – the onus is on each of them to know how their crowd control spell works, what it actually works on (ie beasts, elementals, undead, humanoids, etc) and how long it will work for. They should also be ready to reapply any crowd control when it wears off, until the tank is ready to take it on.

But the main job of the damage dealers is to kill the enemy. Every fight is a race against time – the more damage can be dealt out, the faster the bad guys die. Conversely, the longer a fight lasts, the more damage everyone in the party takes, which means more healing needed – at some point in every fight, if it lasts long enough, the healer will run out of mana and no longer be able to heal – very soon after that the bad guys win!

How do you know how much damage is being doled out? Most people use a damage meter addon such as Recount or Skada. These will track how much damage is done per person, per fight, and on an overall basis. You could also use a website such as World of Logs to upload combat logs to – this will break down your full combat log and enable you to analyse individual elements of each fight.

Do you need to know how much damage you’re doing? No – not really. At the end of the day, as long as you do enough damage to kill the bad guys before they kill you, it doesn’t matter. I know a lot of people feel that it is the be all and end all – even the name of your role reflects that. However, it does depend on what you want to do. You wouldn’t say that, just because you could swim a few lengths in a swimming pool, you would be ready to swim across the channel from England to France – it is a matter of knowing your current limits and your targets. The same goes for doling out damage – there are certain known “estimates” in place for various types of encounters.

You do have to bear in mind, however, that certain expectations are in place when you join a group of others. The others in the group expect that you are able to fulfil the role you signed up for, to the best of your ability, and without them feeling they are compensating for you in some way. If their damage meters are showing that you are doing less than you should be for any particular encounter, consistently, and it is causing problems for the group as a whole, this will cause bad feeling and may result in either the group splitting, or your removal from the group. Being consistently average in a group is not a problem – being consistently bottom with a group that fails in encounters is a problem.

In order to know if your output is good enough for the type of encounter you wish to do, you put an imaginary group of people who have identical motor skills, reflexes, abilities and output as you into that encounter. If they win – you’re ready. If they don’t – you’re not.

Some raid encounters – those that require a group of either 10 or 25 people to do them – have time limits. For example a raid boss may “enrage” after 5 minutes, basically meaning that if the group doesn’t kill it within those 5 minutes, the full group dies.

As we know how much health those bosses have, and how long we have to kill them, and how many people in any given raid group will be damage dealers, it is then fairly easy to work out, on average, how much damage each of those raid members need to do in order to successfully kill the boss. Once you have that figure, you know what to aim for, and whether or not you’re ready.

So … what is dps and what does it mean? In the strictest translation – it means “damage per second”. It is the amount of damage you can give out in a second. Now obviously this is not literal. Encounters often require movement, and a lot of classes cannot do a lot of damage whilst moving. A lot of spells cannot be cast once every second, and a lot of them will not do a massive amount of damage when they hit. So in the true meaning of the phrase, it actually means the average amount of damage you can do, over a long fight. Basically, the longer the better.

You can test it approximately on a “target dummy” – one of those inanimate objects in most main cities where you can throw your spells all out without retaliation. In order to test it fairly you should do 3 seperate tests, each time starting with full mana or focus and keep attacking for 5 minutes, during which time you would use your big cooldowns, your focus/mana regeneration abilities, etc.

If you can, set your damage meter to show your damage as it is happening during the fight – at the end of your 5 minutes you may still have damage over time spells ticking on the target dummy, which will slowly reduce your “damage per second” figure until they wear off. This of course wouldn’t happen on a boss fight, as at the end of the 5 minutes (or the end of the fight), the boss would be dead so there would be no spells ticking over on him anymore.

Whatever figure you get – don’t take it as gospel. Bear in mind that it may go up in a good mixed group due to the number of extra buffs you will receive; but it inevitably will also go down as the majority of encounters require a lot of movement, changing of targets, crowd control, etc. If the amount of damage you do on the target dummy is approximately the same as that you can do overall in a 5 man heroic dungeon run then, congratulations, you probably know your class well, the encounters well, and are good at anticipating what types of attacks and movement is needed.

How do pets fit into it all? Most damage meters will actually include your pet into your damage shown (assuming you have that option selected). Some may not (currently, mainly the shadowy apparition for shadow priests). Basically your DPS is quantified by the amount of damage in total you (and your pets) do to a target, divided by the length of the fight. However, if you die prior to the end of the fight, your damage meter stops “averaging” at that point – so if you did 10,000 damage per second on average, but died only halfway through a fight, the damage meter would still show you did 10,000 dps. In effect though, your actual dps would only have been 5,000 damage per second – as for half of the fight you were not dealing any damage whatsoever.

This also relates to pets. If you are a hunter, for example, your pets damage can automatically be included into yours. If your pet dies halfway through a fight, then suddenly you are no longer getting the benefit of that pets damage. As you are still alive for the rest of the fight, however, the damage meter will average out the amount of damage until the end of the fight, thus taking into account the pet’s death.

Unfortunately, as mentioned before, some pets are not currently included in damage meters as part of your damage – notably the shadowy apparition. These little guys are basically a shadowy version of the priest in question – they turns up randomly if you have a specific damage over time spell running, slowly walking towards the target and then exploding when it gets there. Whilst one is around, there is a higher chance for another to turn up. Now if you watched one of these “pets” and physically worked out it’s damage per second from the time it appears to the time it disappears, you would realise without having a damage meter tell you, that its damage per second is low – depending on how far away from the target you are, it takes a long time to reach it, say between 5 and 10 seconds. The resultant damage it does must therefore be divided by the amount of time it was actually around for. It’s damage per second as it relates to yours must also then be factored in considering the amount of time it is there, compared to how long the fight is. If only one apparition appears throughout an entire 5 minute fight, then the damage it does has to be divided by the full length of the fight.

Wow Dps Meters 8.3

Looking at shadow priests specifically, there is a way to roughly estimate how much damage you are doing overall, including those apparitions – which is to make the amount of damage an apparition does on average a percentage. Having tested it myself, and having looked at other logs for much more accomplished shadow priests than me (ranging from around 10,ooo dps to 32,000 dps), it appears that this particular pet does somewhere between 2% and 5% of a shadow priests total dps. So – if a shadow priest is doing 10,000 dps in a raid, then you can add on (being generous) another 5% to take into account the pet (at least until this particular problem is fixed), making a total of 10,500 dps.

What Does Dps Mean In Wow

In conclusion …. “DPS” refers both to the role of damage dealer and the amount of damage they can do. As long as a damage dealer knows how much damage at a minimum is required for any particular encounter, and knows that they can do more than that consistently, whilst still carrying out all other role requirements (crowd control, movement and positioning abilities, etc), and can demonstrate that to others consistently, then it doesn’t matter how much damage they do. Basically, they must be able to “hold their own” compared to others carrying out the same encounters.